If the fuel system in your sedan is dirty, you will be wasting gas and losing performance as you drive around Barnhart Missouri.

Unless you drive a vintage car, you have fuel injectors. They need to be properly maintained. That is why your owner’s manual has a schedule for cleaning your fuel injectors and other parts of your fuel system.

Your service technician at Kevin’s Car Care has the tools and chemicals to do the job right. Kevin’s Car Care uses a process that gives your car a deep, professional fuel system cleaning. The particles, gum and varnish that build up in your fuel system are removed so that it can run cleanly and efficiently.

After a professional fuel system cleaning, you’ll notice more power, better gas mileage and reduced exhaust emissions. AutoNetTV strongly recommends you follow your manufacturer’s fuel system cleaning service recommendations to keep your vehicle running strong.

It’s expensive to replace a fuel injector that’s been damaged by neglect. Check with your service technician at Kevin’s Car Care and see when your car is scheduled for a fuel system cleaning.

 
 
/>  

A question for our Barnhart Missouri motorists: How long have you been enjoying the romantic glow of your check engine light?

Hey, it’s not there to create ambiance; it’s a warning that something’s wrong. When your check engine light comes on get it checked at a capable Barnhart Missouri service station.

Many conditions that cause the check engine light to come on affect fuel economy. Some very dramatically.

Always make sure you tighten your gas cap until it clicks. A loose gas cap can cause a false sensor reading that’ll make the check engine light come on.

If your date’s eyes are smoldering in the reflected glow of the check engine light, try to think of all the gas money you’ll save by getting it fixed. Give us a call when you are ready: 6364641200

 
 
/>  

This fuel saving tip is so simple, no one from here to Arnold will believe it. It has to do with your gas cap.

The first thing is to make sure it’s screwed on tight. If it’s loose, gas vapor will be constantly leaking out; wasted gas.

And air will get in and that can cause your oxygen sensor to read incorrectly and the oxygen sensor will tell the engine management computer to adjust the fuel-air mix and, well, you get the picture; you’ll be burning more gas around Arnold than you need to.

This could cause the check engine light to come on as well.

A worn gas cap can have the same effect. If you constantly smell gas when you walk by your tank, you might need a new gas cap.

So, twist your cap until it clicks three times – that means it’s on tight. Have your Arnold area service advisor at Kevin’s Car Care inspect the cap to see if it needs to be replaced.

See, I told you it was simple.

Don’t forget to call Kevin’s Car Care at 6364641200 for an appointment to optimize your sedan for better fuel economy. Ask us about maintenance.

The function of the fuel filter is pretty self-explanatory. It filters your fuel. The fuel filter is in the fuel line somewhere in between the fuel tank and the engine. Both gas and diesel vehicles around Barnhart Missouri use fuel filters.

For more information about your fuel filter, visit Kevin’s Car Care or come by our shop located at 7590 US Highway 61-67 in Barnhart, Missouri 63012.
Please call 6364641200 to make an appointment.

Generally speaking there’s not a lot of dirt in our Barnhart Missouri auto fuel supply, but there is enough that you want to screen it out. The problem actually gets worse the older your vehicle becomes. That’s because dirt, rust and other contaminants will settle out of the fuel and onto the bottom of the fuel tank. After your sedan is five years or older, it can actually have a fair amount of sediment built up.

That just means that the fuel filter has to work harder as your sedan ages. It’ll get clogged sooner and need to be replaced more often.

A symptom of a clogged fuel filter is that the engine sputters at highway speeds or under hard acceleration. That’s because enough fuel is getting through around town, but when you need more fuel for speed, enough just can’t get through the filter. Obviously, that could be dangerous if your car or truck can’t get enough power to get you out of harm’s way.

For just that reason, fuel filters have a bypass valve. When the filter is severely clogged, some fuel can bypass the filter all together. Of course that means that dirty, unfiltered fuel is getting through to be burned in the engine.

This dirt can then clog and damage your fuel injectors. Now injectors are not cheap to replace, so you don’t want to cause them damage just because you didn’t spend a few bucks to replace a fuel filter.

You know, in a way, the fuel filter can be the poster child for preventive maintenance. It’s a little part, it’s simple and it’s cheap to take care of. But if it’s neglected, it could lead to thousands of dollars of repair bills.

Those auto service schedules in your owner’s manual are there for a reason. If ever you don’t understand a recommended service, just ask your Barnhart service advisor at Kevin’s Car Care. We’ll be happy to explain.

The last new car sold with a carburetor in North America rolled out of the dealership in 1990. Since then, all new vehicles have had fuel injectors. In very simple terms, a fuel injector is a valve that squirts fuel into your engine. Your engine control computer tells the fuel injector how much gas to deliver as well as the precise time it should be delivered. Of course this happens thousands of times a minute. Fuel injection is a much more precise way of delivering fuel than carburetors. That translates into better fuel economy and power. Virtually all fuel injectors for gas engines are known as port fuel injectors because they deliver the fuel to a port just outside the cylinder. Port fuel injectors operate at about 40 to 80 pounds per square inch of pressure.

A few auto makers have introduced gas direct injection systems on some engines recently. These systems inject the gas directly into the cylinders under very high pressure – hundreds of times the pressure of port injection systems. Although more complicated, direct injection technology promises greater power with improved fuel economy, so we can expect to see more of it in the future.

As you can see, the level of precision required of your fuel injectors is very high. They need to be operating properly in order for your car to run right.

High temperatures under your hood and variations in gas quality cause fuel injectors to become fouled with wax, dirt, and carbon. Injectors can become partially clogged, preventing them from delivering the proper amount of fuel at the correct pressure. The design of each engine requires a specific spray pattern from the fuel injector that might be altered when the injector is dirty. When injectors are dirty, the fuel doesn’t burn as efficiently resulting in poor fuel economy and loss of power. So it is important to keep your fuel injectors clean.

Skilled service technicians at Kevin’s Car Care in Barnhart can perform a fuel system service for you. (Visit http://kevinscarcarellc.com/Our_Team.html.) That is a fuel system service – not just fuel injector cleaning. That is because the fuel has a lot of ways to become dirty or contaminated between the gas tank and the fuel injector. A fuel system service starts with a fuel filter replacement. This filter cleans the gas as it leaves the tank. The various parts of the fuel intake system need to be cleaned from time to time to remove harmful gum, deposits and varnish. Finally, the fuel injectors are cleaned so that they operate properly and deliver the right amount of fuel at the right time.

Your Festus area service center uses a process for cleaning your fuel system that includes state-of-the-art cleaning chemicals as well as some old fashioned scrubbing. Proper maintenance of your fuel system means that you will spend less on gas, enjoy strong performance and prevent costly repairs down the road.